Tag Archives: instructions

My Dream Bathroom! Plus make a bath out of cake!!

Posted on by Abi

I love relaxing into a warm bath in the morning, those few moments of quiet solitude can set you up for a wonderful day. But my bathroom is not quite the sanctuary it should be.

My bath tub has quite a few chips, it’s old and has held up very well but it’s time has most definitely come. My sink suffers from a similar affliction and just looks generally tired. The toilet on the other hand, well that is quite the comical fellow with a handle that only works if it’s attached upside down!

The truth of it is that my bathroom is old, tired and in need of a little lot of love! When it is finally made over I promise I’ll show you all it’s awful faults, so you can marvel at it’s transformation 🙂

For now though I’ll have to console myself by dreaming of my future haven of tranquility. I’d love a large deep possibly clawed bath under the window. The sink and toilet would also follow traditional lines with glinting taps and Edwardian style elegance. Think this bathroom suite from Bathshop 321, it’s called the Hamilton (even the name sounds elegant!). I suppose if we’re dreaming then my bathroom would never need cleaning and would always smell of fresh linen. Maybe I need an Edwardian maid to match my scheme, probably a butler as well because… well because having a butler would just be amazing! I may or may not be humming the theme tune to Downton Abbey as I type ;P

Of course the very best way to illustrate my vision would be through the medium of cake! It may not be as good as the real thing but at least it’s a bit of tasty consolation! So here I am languishing in my gorgeous new bath, filled to the brim 🙂 The foot shaped bathmat is essential!

If you’d like to make your own Bathtub cake below are intstructions for how I made mine 🙂

Step 1

Bake your favourite cake in a loaf tin. I made a madeira cake as I find them easier to carve.

When cooled use a knife to round the corners of your cake until it looks bath shaped.

Step 2

Spread a thin layer of buttercream over your bath.

Step 3

Roll out some ready made white fondant and cover the cake. Next I sprayed the cake lightly with a silver cake decorating spray, this gives an enamel finish to your bath.

Step 4

Cover a cake board with fondant, I made mine slate grey. Then using something long and thin (such as a ruler) lightly press lines into the fondant to create tiles. When finished pop your bathtub onto the board.

Step 5

Now the fun begins, using fondant make a rubber duck (one larger ball pinched at one end for the tail, plus one smaller ball for the head) paint his eyes on with a tiny bit of food colouring.

Then make a bathmat, mine is foot shaped yours could be square or circular etc. I used a cocktail stick to make tiny dots all the way around to simulate sewing marks. Then paint ‘Bath’ on your mat using colouring.

The tap is created out of sausage shapes, one large sausage for the centre bent over slightly. Two smaller sausages on either side, with teeny tiny crosses for the top. I dusted then with edible gold shimmer.

The person is actually just a head and two arms. The arms and made by rolling sausage shapes, one end is flattened slightly then use scissors to snip the fingers. Place into the bathtub on either side.

The head is made by rolling a ball shape, add a smaller ball for the nose and shape using your fingers or tools. Make little indentations for the eyes and mouth (these are painted on using food colouring). There is an ear either side made by rolling a ball shape. Place this onto the bath end.

The hair is made by rolling out fondant very thin, then use a sharp knife to create strands, attach these from the base of the head layering up to the crown.

Step 6

Now to fill the bath, I used buttercream but royal icing would also look good. Mix a little blue colouring into your icing, I didn’t mix it fully to leave a slightly mottled colour. Using a small knife spread this over the top of your bath. Once finish add your rubber duck.

Voila one bath cake 🙂

4 Comments (Leave a comment)

Mollie Makes Mouse Bed Tutorial

Posted on by Abi

I have always had a fascination with mice, the stuffed variety that is not the ones that live in the skirting boards and leave holes everywhere!

In issue 11 of Mollie Makes magazine there was a a pattern to make a trio of cute mice from scraps of fabric. I couldn’t have been more happy!

I barely had the magazine home two seconds before I eagerly started to make the larger mouse, complete with pretty summer dress and cardigan.

The pattern for the dress can be found in Mollie Makes Issue 11 and the instructions for the cardigan can be found on the blog

of the designer

I also I wanted a way to display my little mouse. She was obviously very refined, so it seemed only fitting that she had a beautiful bed to recline in. As she needed to lie down I did make a tiny alteration to the Mouse pattern, choosing to join her legs to the bottom of her body rather than her tummy as the original pattern stated.

I made the bed from cardboard, masking tape, newspaper, PVA glue and paint. I also made a mattress, pillow and blanket.

The side pieces of the bed were cut from thick card. The card was from the back of a child’s sketchbook, but mount board would do just as well.

The two ends were cut with the headboard being larger than the bed end.

The headboard measures 12cms X 14cms.

A rectangle measuring 9cms X 5cms was cut from the end to make the shape of the two legs.

The bed end measures 12cms X 12cms and then a rectangle cut from the bottom the same size as the headboard end.

The base of the bed was cut from the same card. This piece measured 15cms X 18cms and a line was drawn along each long size 1 1/2cms from the edge. This line was scored with knife so the it could be folded up to make a base that a mattress could sit in.The pieces of the bed were taped together with masking tape. It’s a

good idea to use plenty of tape so that the bed feels firm.

I now cut strips of newspaper and glued these onto the bed to give

extra strength. PVA glue works well for this stage.

I carried on pasting paper until the whole bed was covered. I then reinforced by sticking on a further layer before allowing the glue to completely dry, usually about 24 hours.

Once I was satisfied that the bed was dry and felt nice and firm, I painted it with a small tester pot of emulsion paint in a cream colour. I found I needed three coats of paint to completely cover the newspaper print.

To give some pattern to the bed ends I cut some paper from some old music to paste on the ends. The pieces for the headboard end were 11cms X 7cms. The size for the foot end were 11cm X 5.5cms.

Once these pieces were dry I varnished the bed with two coats of quick drying gloss varnish.

Now to make some bedding. Firstly I made a mattress to fit inside the edge pieces. I cut 2 rectangles of fabric from some striped fabric and one piece from some wadding. These rectangles measured 14cms X 20cms. The two pieces of striped fabric were placed right sides facing with the wadding place underneath. I used a 1cm seam allowance and stitched around the edges leaving a 5cm gap at one of the shorter ends. I trimmed some of the fabric off at the corners and turned the mattress the right way out. On the side with the gap the fabric was tucked under and that edge sewn across to complete.

I decided to use a small scrap of pretty pink fabric for the pillow. Two rectangles were cut measuring 13cms X 8cms. These were placed right sides facing and sewn around leaving a gap on one of the shorter sides to turn out the right way. Once complete I turned this was stuffed with a small amount of toy stuffing and the gap sewn shut.

Finally the blanket was knitted by casting on 40 stitches with DK wool using size 4mm needles. I used two different colours to give a striped design. The blanket was knitted in stocking stitch, alternate rows of knit and purl. The stripes were as follows; 8 rows dark blue, 4 rows pale blue, 6 rows dark blue, 4 rows pale blue, 6 rows dark blue, 4 rows pale blue and finally 8 rows dark blue.

The bed was now ready for the small mouse.

6 Comments (Leave a comment)